If you happen to have a Facebook, you may be familiar with our TTC (Trying To Conceive) Group we have on there, basically tailored around the fascinating world of Pee Sticks! Well, we decided to conduct a little experiment with Lime and Lemon Juice to see if perhaps, (as rumor has it) either would create a false Line?!
Leave it to me, to come up with ideas like this! (Ha ha) Really seems to be my forte. I recently conducted an experiment to see if (Soda, Juice or Tea could cause a FALSE POSITIVE RESULT) on a HPT. (Home Pregnancy Test) and to answer that question, Yes! One specific liquid did in fact score a false result. So there has been some speculation about whether or not the sugar content inside the drinks or liquids were responsible for producing a 2nd Line on our lovely little pee sticks – and I decided to put that theory to the test!
After flipping through a ton of website pages and results from our beloved Dr. Google – I have come across some speculation on the possibility that certain liquids (aside from Urine) can cause a false positive on a HPT! (Home Pregnancy Test) and it made me really curious. Needless to say, I decided to conduct a little experiment myself to see if Soda, Juice or Tea could yield a possible false result!
Usually around the time of your missed period, you can take a HPT (Home Pregnancy Test) and get a reliable result. Some also opt to test early! Around 6-12dpo (Days Past Ovulation) implantation can occur, and a few days after that the HCG (Human Chorionic Gonadotropin) can metabolize enough in your Urine stream to then be detected on a HPT. If you’re actively TTC (Trying To Conceive) it can be a pretty exciting time, and you may want to get others opinions on whether or not they see a second Line, once you’ve tested. Many of us are a part of support groups and it’s fun to post pictures. The problem lies when the picture isn’t the best quality, and sometimes it can make it a bit difficult to interpret the results if you’re an outsider looking in. So I decided to make a little tutorial on how to take GOOD pics of your lovely pee sticks!
It’s always good for starters, to take a pic in good lighting! Most of us nowadays have good cell phones with camera’s – that even have a flash!
But – is it always best to use the flash? Simple answer, NO. If you’re using a midstream test that has a splash guard on it, (the clear plastic piece over the results window) the flash will more often than not reflect back and you won’t be able to see the results. Your best option is to turn the flash off. Sometimes though, that can cause another problem. Blurry pics! Here’s a pic that was taken with the flash on. Although it’s not Blurry, you still cannot see the results.
Here’s a few examples of Blurry pics that will be very hard to interpret unless you have an unmistakable, very vivid, dark Test Line! Please try to refrain from posting these.
There’s a very simple remedy for that issue! Maybe on your groups forums or posts you’ve noticed objects on or around their Tests and You’ve wondered why? Well – objects make the camera focus! Especially when you turn the flash off. It’s best to put a test in great lighting and an object next to it or even on it. Most with smart phones can even tap the screen to also help focus things. Here’s a few taken the right way! PLEASE (if you opt to post anything) only post pics that are good and visible otherwise it’ll defeat the purpose if you’re trying to get a second opinion.
Now, I’m going to proceed to show you some other, “Picture Don’ts.” Here we have the ever so popular angled Tests. Unfortunately even in the best of lighting, it’s still very hard to see a second Line this way. Your best bet is to take the pic directly above the Tests!
Love tweaking? What exactly is tweaking? Well, most of use different apps or graphics programs on our phones nowadays or even on our computers that can put different filters, enhance contrast, saturation, etc. On any pic of a HPT. The idea is to either pull some color on a line that is considered questionable, or to make a line a little more visible. Tweaking is great! The problem lies with over tweaking. And you can do that by using several different methods to try and enhance a test pic. Most don’t even realize though that when you over-tweak, you’re making it even harder to interpret. It can cause way too much pixilization with way too many colors, so if there was a chance to spot a line – there definitely won’t be afterwards. PLEASE, it’s better just to post the original and let the others do the tweaking!
And of course the invert! If you are going to tweak, I would highly recommend to refrain from doing that. Inverts will make most ANY Line visible including (Indent Lines) and of course the dreadful (Evaporation Lines).
If you look close enough at the inverted pic up above, you’ll see a Line. Looks promising, doesn’t it? Not so much. That’s an indent. So Yeah.
Even if you can’t test during the day when you’ll have the best lighting available – you can still make your pictures visible. Making sure the camera will focus correctly, and aiming directly right above the test is key!
SUMMARY OF OUR WONDERFUL TUTORIAL HERE:
– Make sure you have good lighting! (Window seals are perfect for this type of thing)
– Make sure you turn your flash off
– Make sure you have an object on or near the test (to help the camera focus)
– Make sure you Take a pic directly up above the test, and as close to the results window as possible!
IN THE END (Regardless if it’s positive or Negative results) YOU WANT YOUR TEST PICS TO LOOK LIKE THIS!
Nice, clean, bright and clearly visible! I hope this has helped you and we send Baby Dust to everyone in their TTC journey!
Many of us often opt to start using OPK’s (Ovulation Predictor Kits) to get a heads up on when Ovulation may occur. Our LH (Luteinizing Hormone) levels normally begin to rise just hours prior, and can be measured by using OPK’s. Normally the first true positive result – when the Test Line is equal to or Darker than the Control Line, indicates that Ovulation should be taking place anytime within 12-72 hours. But when using these, how will Urine concentration typically effect those results? It’s always recommended to use highly Concentrated (afternoon) Urine between 2-8pm at the same time everyday! Well, I decided to put it to the test. I dipped one OPK test Strip in Concentrated Urine, and then dipped a second one (same brand) around the same time minus an hour and a ½ in diluted Urine. See what happens next!
I did an experiment with Concentrated Urine vs Diluted Urine (within the same time frame) to see if it effected the outcome of the results! You may be surprised!
I’m sure by now if you’ve started your TTC (Trying To Conceive) journey, you’ve started charting your BBT (Basal Body Temperature), CM (Cervical Mucus), and possibly even your CP (Cervical Position). Some even opt to Take OPK’s (Ovulation Predictor Kits) in conjunction, to verify whether or not you’re in your Fertile Window! Once Ovulation has taken place, you can usually get a reliable result on a HPT (Home Pregnancy Test) when you’ve missed a period. But what does a true positive result look like? What if a Line appears but has no color? What if I only see a Line when I hold the test up to a light? What if it looks like a shadow? What if it appears an hour later? Sometimes ghost-like Lines appear where a TRUE POSITIVE would have appeared (whether it’s Pink or Blue Dye) if HCG (Human Chorionic Gonadotropin) had been detected. And Yes, Sometimes (although it can be rare) these Lines can have a bit of color to them. Most of the time if the Line is thick, they’re considered (Evaporation Lines). Regardless of thickness, (especially if a Line appears outside of the suggested timeframe) – These are considered to be Negative. If that happens, I highly suggest waiting a couple days and retesting if you’re ever unsure since HCG doubles every two days. I decided to put together a Gallery of actual Tests that had, “Indent Lines,” that displays both Pink Dye and Blue Dye Tests, manufactured by different brands!
Do you have a Test you would like to submit? Email, Tweet, Post or DM them to us!
*PLEASE INCLUDE whether it’s a Positive, Negative, or Evap Line!
*ALSO – If you have submitted a Test and you notice it’s in the wrong category, PLEASE let us know so we can put it in the right category as soon as possible! Thanks
Whenever you’re testing for Pregnancy, (especially in Early Pregnancy) it’s always best to use FMU (First Morning Urine) in order to have the highest amount of HCG (Human Chorionic Gonadotropin) available for detection. If that’s not possible you can always hold your Urine for a minimum of 2-4 hours while refraining from drinking any beverages!
But unfortunately with that being said, highly Concentrated Urine typically is very dark in color, in comparison to diluted Urine which is very transparent and light. Sometimes when the test is completely dry, (more often than not) after it’s been sitting out for a while – it can leave a nasty looking Urine film where it once ran across the test.
If you’re anything like most of who are actively TTC (Trying To Conceive) there may come a time when you would like to show a family member or even a friend online to seek their opinion in distinguishing a second Line – (Evaporation Line?) or perhaps you would just simply like to share the good news! Either way, a strong, yellow film can make the test very undesirable and even a bit embarrassing to show. So what can you do?
I conducted an Experiment, and this is what the Tests initially looked like the next day.
I was supposed to make an Update on the outcome and was a bit grossed out with the way they looked. Not to mention Dried Urine can also cause an Evaporation Line to appear.
I had read somewhere that you can CLEAN a TEST simply by redepositing water on it, so I thought I would test the theory out. I used a Cassette Test and a Test Strip for this specific Experiment. I treated both of the HCG Tests as if they had never been used before and deposited 5 drops of water where the Urine would go, then proceeded to re-dip the Test Strip. I started to see the water (slowly but surely) literally wash away the Dried, excess Urine!
I was actually very surprised that I was watching this work Because the stains were REALLY DARK.
The trick is, you have to make sure that the test is COMPLETELY DRY first before attempting this, otherwise there’s no way for the water to absorb and you will over saturate the test including the container (which can be a huge pain!)
In the end, this is how the Tests looked! And I gotta say, I was really impressed!
You may want to do those a couple times before you deem this as Picture-Worthy!